8-10 Samsung Electronics
Using installation/service mode of ERV wired remote controller(cont.)
Q The example of setting ERV wired remote controller options
1. Press the Mode and buttons at the same time for more
than 3 seconds.
▶ When main menu is displayed, press the or button to select no.5.
2. Press the Away button to select the number you will set on
the sub menu.
▶ Press the or button to select no.1
3. Press the Away button to enter the data setting stage.
▶ When you enter the setting stage, the current setting is displayed .
4. Press the or button to select no.1
▶ The status of external interlock changes from "Disuse" to "Use".
5. Press the Set button to complete the option settings.
▶ Save the setting value and exit to sub menu .
6. Press the Timer button to exit to normal mode.
To Next Page
Loading...
