Samsung ERV - Cleaning the Heat Exchange Element

Samsung Electronics 10-5
Q AN026JSKLKN
10-4 Cleaning the Heat Exchange Element
1. Remove 3 screws on the maintenance cover.
2. Take off the maintenance cover from the ventilator.
3. Detach the heat exchange element by pulling it upward.
O
The heat exchange element is hea vy. Take care not to drop it.
4. Remove all dust and particles on the heat exchange element with a
nozzle of a vacuum cleaner.
O
Take care not to attach the nozzle too close.
It may damage the heat exchange element.
5. Reassemble the heat exchange element and the maintenance cover.
tDo not wash the heat exchange element. It may decrease its efficiency.
t*GUIFIFBUFYDIBOHFFMFNFOUJTEBNBHFEQVSDIBTFJUJOEJWJEVBMMZ
in a service center or an agency that you bought the product.
t.BLFTVSFUPUVSOPGGUIFTVCQPXFSTVQQMZ
Heat exchange
element
Screw