Samsung ERV - Option Setting Error

9-12 Samsung Electronics
AN026JSKLKN 0 1 0 3 4 0 1 1 6 4 4 4 2 1 4 4 4 0 3 0 2 0 0 3
AN035JSKLKN 0 1 0 3 4 0 1 1 4 4 3 4 2 1 3 4 3 0 3 0 2 0 0 5
AN050JSKLKN 0 1 0 3 4 0 1 1 6 4 4 4 2 1 5 4 4 0 3 0 2 0 0 6
AN080JSKLKN 0 1 0 3 4 0 1 1 5 4 4 2 2 1 4 4 4 0 3 0 2 0 0 7
AN100JSKLKN 0 1 0 3 4 0 1 1 6 4 4 3 2 1 5 4 4 0 3 0 2 0 0 8
Error Mode Option setting error
Display E163
Check Method Entering incorrect ERV option or entering no ERV option at all
Cause Entering incorrect ERV option or entering no ERV option at all
Sensor SPEC.
9-4-10 Option Setting Error
ఐProgress re-input after reconfirming option by model attached below.
If you use a existing EEPROM after replace MAIN PBA, don't need to reset option.