54
2nd 3rd Description
Advanced Settings LDAP Set LDAP connection or configure connected LDAP queries.
• Set LDAP Connection
Configure a new LDAP connection.
– Use LDAP: Whether or not to use LDAP
– Import Setup Value: Can fetch the following settings from LDAPConnectionConfig.txt stored on the USB(Password
excluded)
"
For more information, refer to 'How to create a text file for use of LDAP'.
– Authentication Type: Kerberos, Anonymous or Basic whichever is supported by the LDAP server
– User ID: DN(Distinguished Name) of the User ID that is used in the LDAP server
"
The format of User ID complies with the DN format of LDAP.
e.g. cn=admin, dc=myldap, dc=com
– Password: Password that is used for authentication of the LDAP server
– Server Address: IP or URL of the LDAP server
– Server Port Number: Port number of the LDAP server
– Base DN: Top DN that is to be used for search in the DIT(Directory Information Tree) when connecting the LDAP
– SSL/TLS: Whether or not to use SSL/TLS
"
When SSL/TLS is set to be Use, the encrypted data communication is enabled.
– Use Untrusted Certificates: Whether or not to allow untrusted certificates
"
The following menu is activated when setting the Authentication Type to Kerberos.
"
Kerberos Realm: Kerberos realm data
"
KDC Host: KDC Host URL
"
KDC Port: KDC Host port number
To Next Page
Loading...
