Samsung Galaxy Core Prime SM-G360 - Wi-Fi

80
Settings
Wi-Fi and Wi-Fi Direct
Wi-Fi Settings
The Wi-Fi settings menu allows you to set
up many of your device’s advanced Wi-Fi
services.
1. From a Home screen, tap Apps >
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn
Wi-Fi on.
3. Tap Smart network switch to
automatically switch between Wi-Fi and
mobile networks to maintain a stable
Internet connection.
4. Tap
Moreoptions for options:
•
Scan: Start another scan for nearby
Wi-Fi networks.
•
Wi-Fi Direct: Configure a Wi-Fi Direct
connection with a nearby device.
•
Advanced:
-
Network notification: Receive a
notification when new Wireless
Access Points (WAPs) are
available.
-
Keep Wi-Fi on during sleep:
Specify when to disconnect from
Wi-Fi.
-
Always allow scanning: Allow
Google location service and other
apps to scan for networks, even
when Wi-Fi is turned off.
-
Install certificates: Install
authentication certificates.
-
MAC address: View your device’s
MAC address, which is required
when connecting to some secured
networks (not configurable).
-
IP address: View your device’s IP
address (not configurable).
•
WPS push button: Set up a
connection to a WPS (Wi-Fi
Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN
used by your device to set up a
PIN-secured connection to a Wi-Fi
router or other equipment (not
configurable).
DRAFT
for nearby
gure a Wigure
-
Fi Direct Fi D
a nearby device. a nearby device.
ork notificationork notification
: Receive a : Rec
tification when new Wireless tification when new Wireles
Access Points (WAPs) are Access Points (WAPs)
ailable.ailable
Wi-Fi on duringWi-Fi on during
when to diswhen to dis
is is
certificatecertifi
entication certificenticatio
MAC addressMAC address
: View your
: V
MAC address, which is req
MAC address, whic
when connecting to som
when connecting to so
networks (not configuworks (not configu
--
IP addressIP ad
: View
address (not cad
•
WPS push bPS pus
connectioconnectio
ProtectProtec
equi
•
W