Samsung Galaxy Core Prime SM-G360 - Pair Bluetooth Devices

83
Settings
Bluetooth
Scan for Bluetooth Devices
When you want to pair with another
Bluetooth device, you can scan for nearby
devices that are visible.
1. From a Home screen, tap Apps >
Settings.
2. Tap Bluetooth, and then tap ON/OFF
to turn on Bluetooth.
3. When Bluetooth is first turned on, it
scans for nearby Bluetooth devices and
displays them.
•
To manually perform a new scan, tap
Scan.
Pair Bluetooth Devices
The Bluetooth pairing process allows you
to establish trusted connections between
your device and another Bluetooth device.
Pairing between two Bluetooth devices
is a one-time process. Once a pairing
is created, the devices will continue to
recognize their partnership and exchange
information without having to re-enter a
passcode.
1. From a Home screen, tap
Apps >
Settings.
2. Tap Bluetooth, and then tap ON/OFF
to turn on Bluetooth.
3. Make sure that the target device is
discoverable, so that your device can
find it. Refer to the instructions that
came with the device to find out how to
set it to discoverable mode.
4. Tap Scan. Your device will start to scan
for Bluetooth devices within range.
5. When you see the name of the target
device displayed in the Bluetooth
devices section, tap the name. Your
device then automatically tries to pair
with the target device. If automatic
pairing fails, enter the passcode
supplied with the target device.
Note: Due to different specifications and
features of other Bluetooth-compatible
devices, display and operations may be
different, and functions such as transfer
or exchange may not be possible with all
Bluetooth compatible devices.
DRAFT
, tap tap
cesces
rocess allows you rocess allows y
onnections between nnections between
nother Bluetooth device. Bluetooth device.
en two Bluetooth devices en two Bluetooth dev
me process. Once a pairing me process. Once a pairing
d, the devices will continue tod, the devices will continue to
their partnership and exctheir partnership an
without having to re-without having to r
reen, reen,
FT
evicevic
verable mverab
. Your device will. Your d
etooth devices within ra
etooth devices
hen you see the name of the
hen you see the name
device displayed in the Bluet
device displayed in the Blue
devices section, tap the ndevices section, tap the n
device then automaticadevice then
with the target devicwith the
pairing fails, enterring fa
supplied with tsupplied wit
NoteNote
: Due to : Due to
features of features of
devices,
differed
or or