Section 1: Getting Started
This section explains how to start using your phone by first
configuring your hardware, activating your service, and then
setting up your voice mail.
2. Lift the cover up (2) and away from the phone (3).
Setting Up Your Phone
Prior to use it is necessary to install both the battery and SIM
into their corresponding internal compartments. The
microSD™ card slot is also located in this same internal
area.
1. Remove the back cover by inserting a fingernail into
the slot on the top of your phone (1).
Caution!
Do not bend or twist the back cover excessively.
Doing so may damage the cover.
Getting Started 6
To Next Page
Loading...
