The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so
that
you can continue
conversing with
that person. The
active call will appear in a green box.
–
My call sound
: assigns a sound equalizer preset for use during
an active call. Sometimes you might need the sound to be
softer, clearer, or optimized for one ear or the other.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap
Hold
. This action places
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
To make a new call while you have a call in progress
1. Tap
Hold
Hold
.
2. Tap
Add call
to display the dialer.
.
Once connected, the active call will appear in a large
box at the top of your screen and the call on hold will
appear in a smaller box in the middle of your screen.
3. Enter the new number and tap
Switching Between Calls
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
1. Tap Swap.
2. Tap
to end the currently active call.
To end a specific call
1. Tap
Swap
until the call you want to end appears in a
green box.
2. Tap
to end the specific call.
3. Tap to end the remaining call.
Call Functions 48
To Next Page
Loading...
