Default setup options
Your phone default is set to Automatic (to automatically
search for an available network. You can set this option to
Manual to select a network each time you connect.
1. From the Home screen, tap
➔
Settings
➔
More
settings
➔
Mobile networks
.
2. Tap
Network operators
.
3. Tap
Default setup
.
4. Tap
Manual
to locate and connect to a network
manually, or tap
Automatic
to allow the device to
automatically select a network.
VPN settings
The VPN settings menu allows you to set up and manage
Virtual Private Networks (VPNs).
Important!
Before you can use a VPN you must establish and
configure one.
Adding a Basic VPN
1. Before using VPN, you must first set up a screen unlock
PIN or passwor
d.
For more information, refer to “Lock
Screen Settings” on pag
e 123.
2. From the Home screen, tap
➔
Settings
➔
More
settings
➔
VPN
.
3. Tap
Basic VPN
.
4. Tap
Add VPN network
.
5. Enter a name for the VPN network in the
Name
field.
6. Select a VPN type from the
Type
drop-down menu. The
options are:
•
PPTP (Point-to-Point Tunneling Protocol)
•
L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol
Security Pre-Shared Key)
•
L2TP/IPSec RSA
•
IPSec Xauth PSK
•
IPSec Xauth RSA
•
IPSec Hybrid RSA
7. Enter the Server address and any other required fields
that are dependent upon the
Type
you entered
previously.
8. Tap the
Show advanced options
check box to display
additional VPN options.
9. Tap
Save
to save your VPN settings.
111
To Next Page
Loading...
