Adding an Advanced IPsec VPN
1. Before using VPN, you must first set up a screen unlock
PIN or passwor
d.
For more information, refer to “Lock
Screen Settings” on page 123.
➔
Settings
➔
More
settings
➔
VPN
.
2. From the Home screen, tap
3. Tap
Advanced IPsec VPN
.
4. Tap
Add VPN Connection
.
5. Enter a password and tap
OK
.
6. Enter a name for the VPN connection in the
VPN
connection name
field.
7. Select a IPsec connection type from the drop-down
menu.
8. Enter any other required information.
9. Tap the
Show advanced options
to display additional
VPN options.
10. Tap
Save
to save your VPN settings.
NFC
NFC (Near Field Communication) allows data exchange when
you touch your device with another compatible device. This
is used for applications such as S Beam.
To activate NFC, follow these steps:
1. From the Home screen, tap
➔
Settings
➔
More
settings
.
2. Tap the
OFF / ON
slider to turn NFC on
ON
.
S Beam
When S Beam is activated, you can beam files to another
NFC-capable device by holding the devices close together.
You can beam images and videos from your Gallery, music
files from your Music Player, and more.
1. From the Home screen, tap
➔
Settings
➔
More
settings
➔
S Beam
.
2. Tap the
OFF / ON
slider to turn S Beam on
ON
.
3. Touch the back of your device with another NFC-
capable device and the content is transferred.
Changing Your Settings 112
To Next Page
Loading...
