Communication
29
›
Use additional features
You can use various other call-related features, such as call
forwarding.
Set call forwarding
Call forwarding is a network feature to send incoming
calls to another number that you specify. You can set this
feature separately for several conditions when you are not
able to answer calls, such as when you are already on the
phone or when you are outside of the service area.
1
In Idle mode, open the application list and select
Settings
→
Call settings
→
Call forwarding.
2
Select a condition.
3
Enter the number to which calls will be forwarded and
select Enable.
Your setting will be sent to the network.
• To listen and talk to the other party via a Bluetooth
headset, select Headset.
• To turn o the microphone so that the other party
cannot hear you, select Mute.
• To activate the speakerphone feature, select Speaker.
In noisy environments, you may have diculty
hearing some calls while using the speakerphone
feature. For better audio performance, use the
normal phone mode.
• To switch between the two calls, select Swap.
• To make a multiparty call (conference call), make or
answer a second call and when connected to the second
party, select Merge calls. You must subscribe to the
multiparty call service to use this feature.
›
View and dial missed calls
Your device will display calls you have missed. To dial the
number of a missed call, open the shortcuts panel and
select the missed call notication.
To Next Page
Loading...
