Connectivity
72
An active WLAN running in the background will
consume battery power. To preserve battery power,
activate the WLAN only when needed.
›
Find and connect to a WLAN
1
In Idle mode, open the application list and select
Settings
→
Wireless & networks
→
Wi-Fi settings.
The device will automatically search for available
WLANs.
2
Select a network under Wi-Fi networks.
3
Enter a password for the network (if necessary).
4
Select Connect.
2
When prompted, enter the PIN for the Bluetooth
wireless feature and select OK (if necessary).
3
Select Accept to conrm that you are willing to receive
data from the device (if necessary).
Received data is saved to the bluetooth folder.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
›
Activate the WLAN feature
In Idle mode, open the application list and select Settings
→
Wireless & networks
→
Wi-Fi settings
→
Wi-Fi.
To Next Page
Loading...
