Samsung GALAXY J7 PERX - Connections Settings; Wi-Fi Settings Menu

Settings Connections Settings 116
Connections Settings
Thefollowingtopicsintroduceyourphone’sConnectionssettingsoptions.
Wi-Fi Settings Menu
TheWi-FisettingsmenuletsyouturnWi-Fionoroff,setupandconnecttoavailableWi-Finetworks,
andconfigureadvancedWi-Fioptions.
FormoreinformationaboutWi-Fisettings,seeWi-Fi.
1.
Fromhome,tapApps >Settings >Connections .
2. TapWi-Fi.
3. TapOn/OfftoturnWi-Fion.
l TodisableWi-Fi,tapOn/Offagain.
4. TapaWi-Finetwork,enterthepassword,andtapConnect.
5. ConfigureyourWi-Fisettings.
l Thepassword,forahouseholdwirelessLANrouter,issometimesfoundonastickeronthe
router(WEP,WPA,KEY,etc.).Contacttheroutermanufacturerforinformation.Forthe
passwordforapublicwirelessLAN,checkwithuser'sserviceprovider.
l Enteringapasswordisnotrequiredifanaccesspointisnotsecurityprotected.
Connect to a Wi-Fi Network Using WPS
Wi-FiProtectedSetup(WPS)isanetworksecuritystandardthatallowsyoutoeasilysecurea
wirelessnetworkconnectionbetweenyourphoneandarouter.
ToconnectusingaWPSbutton:
1. FromWi-Fisettings,tapAdvanced>WPS push button.
2. PresstheWPSbuttononyourrouter.
3. Followthepromptstocompletetheconnection.
ToconnectusingaPersonalIdentificationNumber(PIN):
1. FromWi-Fisettings,tapAdvanced>WPS PIN entry.
2. EnterthePINdisplayedonyourrouter.
3. Followthepromptstocompletetheconnection.