Applications and Widgets 100
2. Touch and slide the
Wi-Fi
slider to the right to turn it on.
The slider color indicates the activation status.
3. Touch
Wi-Fi Direct
.
4. Touch
Scan
and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Touch
Multi-connect
➔
Scan
and select all the device
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note:
The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5. Touch
Done
. The direct connection is then established.
Confirm appears in the Status bar.
6. When prompted to complete the connection, the
recipient should touch
OK
. Your status field now reads
“Connected” and your connected device is listed within
the Wi-Fi Direct devices listing.
7. Each partner (including yourself) must then touch
Accept
to consent to the new Wi-Fi Direct pairing.
To enable Share shot on Camera:
1. From the Home screen, touch
Menu
➔
Apps
➔
Camera
➔
Quick Settings
➔
Share
➔
Share shot
.
2. If you are prompted to activate your Wi-Fi Direct
connection, touch
OK
and follow the activation
procedures for Wi-Fi Direct.
To Next Page
Loading...
