Samsung Galaxy S4 SCH-R970C - Scanning and Connecting to a Wi-Fi Network; Adding a Wi-Fi Network Manually

139
Scanning and Connecting to a Wi-Fi Network
1. Turn Wi-Fi on (see “Turning Wi-Fi On” on page 138).
Your phone scans for available hotspots and pops-up a
list of any it finds.
2. To connect to a hotspot, touch it on the pop-up list.
• If the Wi-Fi network is open, you will be automatically
connected.
• If the Wi-Fi network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔
Settings ➔ Connections tab ➔ Wi-Fi .
2. The
Wi-Fi options screen displays. (For more
information, refer to “Accessing Settings” on page
151.)
3. Touch
Wi-Fi to turn on Wi-Fi.
4. Touch
Add Wi-Fi network , then enter the following
values:
• Network SSID : Enter the name of the WAP (Wireless Access
Point).
• Security : Select the type of security used by the WAP.
• Password : If the WAP is secured, enter the password or key.
5. Tap Connect .