73
Call alerts
Set options for sounds and vibrations to occur during calls.
From the
Call Settings
screen, touch
Call alerts
. The
following options are available:
• Call vibrations
: Enable
Vibrate on connection to network
to
have your phone vibrate when it connects to the network.
Enable on
Call-end vibration
to have the phone vibrate when
the other caller ends the call.
•Call status tones
: Choose options for sounds to play during
calls. Enable
Call connect tone
to have the phone play a tone
when the other caller answers a call. Enable
Minute minder
to
have a tone play once per minute during a call. Enable
Call end
tone
to have the phone play a tone when the other caller ends
the call.
• Alerts on call
: Enable to have notifications for alarms and new
messages play during phone calls. When disabled, these
notifications will be muted during a call.
Call accessories
Configure headset options for calls.
From the
Call Settings
screen, touch
Call accessories
.
The following options are available:
• Headset settings for incoming calls
:
–
Automatic answering
: When enabled, and you have a
headset connected to the Headset Jack, incoming calls are
answered automatically after a delay, set at Automatic
answering timer.
–
Automatic answering timer
: Choose a time period to delay
before automatically answering an incoming call when
Automatic answering is enabled and a headset is connected to
the phone.
• Bluetooth headset settings
:
–
Outgoing call conditions
: When the phone is paired with a
Bluetooth headset, you can choose to make calls even when the
phone is locked.
To Next Page
Loading...
