Samsung GALAXY S8+ - Page 176

Settings 169
Bluetooth Settings Operations
•
Change your phone name: From Bluetooth settings,
tap More options > Rename device, enter a new
name, and tap Done.
-
This changes the name of your phone as seen by
other devices.
•
Pairing Bluetooth devices: Make sure the other
devices are set to be discovered. From Bluetooth
settings, tap the device name in “Available devices”
and follow the prompts.
-
Depending on the device, you may be required to
enter or accept a passkey.
-
If the target device does not appear, tap Scan to
search again.
-
This setting is available when Bluetooth is
enabled.
•
Change the name of a paired device: From
Bluetooth settings, tap Settings next to a paired
device name, tap Rename, enter a new name, and
tap OK.
-
Emoticons cannot be used in a device name.
-
This setting is available when Bluetooth is
enabled.
•
Canceling pairing: From Bluetooth settings, tap
Settings next to a paired device name, and then tap
Unpair.
-
This setting is available when Bluetooth is
enabled.
•
Search for other devices: From Bluetooth settings,
tap Scan.
-
This setting is available when Bluetooth is
enabled.
•
Check files received using Bluetooth transfer:
From Bluetooth settings, tap More options >
Receivedfiles, and then follow the prompts.