www.jouleuk.co.uk | www.joule.ie
58
Transport and Handling
Care must be taken when transporting, storing and installing the equipment:
At least two people should lift the cylinder to prevent injuries.
The cylinder must be stored in a dry area and must never be dropped during handling.
Packaging should only be removed at the installation location.
The cylinder must be installed on a level oor with the required load bearing capability. Installation, ser-
vicing, maintenance and repair must be carried out by a competent person.
The Smart Plumb Compact unit is delivered fully
packaged and xed to a wooden pallet base. Care
should be taken when transporting the cylinder
unit ensuring that the casing is not damaged by
impact.
Do not remove the protective packaging until the
cylinder unit has reached its nal location. This
will help protect the structure and control panel.
The cylinder unit must be transported in an upright position only.
Smart Plumb Compact Installation
Transport and Handling
7
System
To Next Page
Loading...
