61
using tools and applications
5. To insert a transition effect between image or
video clips, press <Options> → Insert →
Transition → an effect.
You can apply a special effect to image or video
clips by pressing <Options> → Effects → an
effect.
6. When you are finished, press <Options> →
Export.
7. Enter a new file name and select Export.
8. To check the file, select Yes (if necessary).
Trim any segment of videos
1. In Menu mode, select Applications → Video
editor.
2. Press <Options> → Import → Video → a video
category → a video → <Select>.
3. Press <Options> → Trim.
4. Scroll left or right on the video and press <Start
mark> at the point where you want the new
video to begin.
5. Press <End mark> at the point where you want
the new video to end.
6. Press <Trim>.
7. Save the edited video with a new file name. Refer
to steps 6-8 in “Make a new video.”
Split videos
1. In Menu mode, select Applications → Video
editor.
2. Press <Options> → Import → Video → a video
category → a video → <Select>.
3. Press <Options> → Split.
4. Scroll left or right on the video and press <Split>
at the point where you want to divide the file into
two clips.