3-8
3. Disassembly and Reassemble
Description & Screws Picture Description
4
Remove screws from the ASSY COVER REAR.
(In this step, two types of screws are used.)
32" : 1 EA (•
) / 3 EA ( )
40" : 1 EA (•
) / 4 EA ( )
49" : 1 EA (•
) / 4 EA ( )
55" : 1 EA (•
) / 4 EA ( )
Screws
6003-001782
SCREW-TAPTYPE : M4 x L12, ZPC(BLK)
6001-002621
SCREW-MACHINE : M4 x L8, ZPC(BLK)
5
Remove the ASSY COVER P-REAR.
Insert the SVC JIG-ASSY MISC P-JIG at •
the indicated positions to release bottom left
corners of the rear cover.
SVC JIG-ASSY MISC P-JIG
BN81-12884*
1 Insert the disassembly Jig
2 Move it to the side
SVC JIG-ASSY MISC P-JIG should be fully •
inserted and then pry to release the rear
cover mounting clips.
Open Direction
To Next Page
Loading...
