Samsung HG24EE690AB - 3. Disassembly and Reassembly (1); 3-1. Disassembly and Reassembly

3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully.2.
Use the Samsung Service tool to disassemble the cabinet. -
Recommend to use the Samsung Service tool.•
Recommended Torque for Cabinet/Stand screws : 22.0 ~ 26.5lbf -
A strength of Torque can be changed depending on the situation.•
3-1. Disassembly and Reassembly
24 inches 
Description Picture Description
1
Place TV face down on cushioned table.
2
Remove screws of ASSY COVER REAR.
24" : 4EA•
Screws
6003-001782
SCREW-TAPTYPE : M4 x L12, ZPC(BLK)
3
Remove the ASSY COVER REAR and ASSY STAND
P-BOTTOM.
4
Remove the Power Cables and Speaker Cables.
Speaker Cable
Power Cable
Power Cable