4-6. Software Upgrade
How to Upgrade S/W and Micom
Insert a USB drive containing the rmaware upgrade into the Set. Please be careful to not disconnect the power -
or remove the USB drive while upgrades are being applied.
The set will turn off and turn on automatically after completing the rmware upgrade. Please check the rmware -
version after the upgrades are complete (the new version will have a higher number than the old version).
When software is upgraded, video and audio settings you have made will return to their default (factory) settings. -
We recommend you write down your settings so that you can easily reset them after the upgrade.
4-6-1. Main S/W Upgrade
Download the rmware le for your region to your USB device.1.
Store the SW program named " - T-M14HKDEUCB" in a USB memory stick.
T-M14HKDEUCB
Main SW
Connect the USB memory stick.2.
USB memory stick
Click the 3. MENU button on the remote control.
You can use OSD menu. -
Select 4. Support menu.
Locate the menu cursor - Software Upgrade menu.
To Next Page
Loading...
