Samsung HG24EE690AB - 4-3-2. Entering Factory Mode

4-3-2. Entering Factory Mode
To enter Service Mode Press the remote - control keys in this sequence :
If you do not have Factory remote control•
Remote Button :• INFO MENU MUTE Power ON
If you have Factory remote control•
Remote Button :• INFO Factory
If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu)•
Ex. SAMPLE Model -
T-M14HKDEUCB-xxxx
T-M14HKDEUSB-xxxx
BT Version : ****
Camera Version : ****
EDID FAIL
CALIB : AV / COMP / PC / HDMI /
Option : xxxx,EU,690,NONE
RFS : "X14xxxxx" KE/201x-xx-xx
KERNEL : xx.xxxx, /
DTP-DTVTD-xxxx-xxxx
TCON Version : ----
Model : HGxxEE690
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : XXXXXX(x.x.xx_xxxx)
CIP SUCCESS
CO Nf/ W/ M/ D/ H2 PO AO / S/ N/ SC/LYNK
CRC : ----
Factory Data : xxx / EERC Version : xxx
SmartControl : ****
DTP-BP-HAL-xxxx
DTP-BP-MW-xxxx
DTP-BP-APP-xxxx
POP-FLA-14-FHD_SMART-xxx
Date of purchase : mm/dd/yyyy
Main SW Version 9
Wired MAC (Status) 9
Sub SW Version 9
Wireless MAC (Wi-Fi Module) 9
CO NFO WO. etc. 9
Certicate•
Netx•
Wide Vine•
etc. Status•
Testing Items 9
4-18
4. Troubleshooting