Samsung HG24EE690AB - Page 120

2-39
2. Product specications
Hotel TV Function
Description
Category Item Initial value
System
Self
Diagnosis
for TV
Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem •
appears in the test picture, select Yes and follow the directions on
the screen.
Sound Test: Use the built-in melody sound to check for sound •
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
Self
Diagnosis
for
HTV
HD Function Check Menu On Executing Item Below OSD is displayed
ProIdiom DTV Channel Key Loss : Ok/Failure (Hotel US) STB SI
Vendor
Setting : SI Name Ok/Failure•
Bathroom AMP : Ok/Failure (Hotel EU)•
RTC : Ok/Failure (Hotel EU)•
PC Audio Test : Ok/Failure•
PC Self Test : Ok/Failure•
SW
Update
SW USB Update function
Service
Pattern
OFF Same function with SVC Service Pattern
Sound Bar
Out
OFF
ON: TV speaker sound will be mute. Sound will come out through
HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.•
Contact
Samsung
Display the web site of related Samsung service center, software
version, and Mac address information.
Standby
LED
ON
When the TV is in standby mode, you can congure the settings of
external LED.
ON: The LED is on.•
OFF: The LED is off.•
TV Reset Returns all settings on the TV to their factory defaults.•
NOTE
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV rmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.