USB Cloning
Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
y Cloning from TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear or side of the TV.
2.
MUTE119ENTERE
3. Press the ▲ or ▼Clone TV to USB, and press the
ENTERE
4. Clone TV to USB is displayed. Press the
ENTERE
5. The TV displays one of the following messages:
y In Progress: Copying data to USB.
y Completed: Copy was successful.
y Failed: Copy was not successful.
y No USB: USB is not connected.
✎ The cloned values include the values on the Guest side menu
(5V 0.5A)
/ CLONING
USB
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
y Cloning from USB to TV : Copies menu settings in a USB device to a TV.
✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTERE
seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear or side of the
TV.
3. Turn the TV on.
4.
MUTE → 1 → 1 → 9 → ENTERE
5. Press the ▲ or ▼
press the ENTERE
6. The message Clone USB to TV is displayed. Press the ENTERE
7. The TV displays one of the following messages:
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
y In Progress: Copying data to TV.
y Completed: Copy was successful.
y Failed: Copy was not successful.
y No USB: USB is not connected
y No File
✎
To Next Page
Loading...
