Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
displayed on each TV's OSD.
–
– You can set the ID code to any digit from 0 to 9.
– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTERETURN
2.
✎ The TV will display the OSD until you press the EXIT
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
– To reset the ID code, press the MUTEEXIT
To Next Page
Loading...
