68
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically look for a Bluetooth
device and try to make a connection with it.
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
1 In Pairing mode, press and hold the Talk button to enter Active pairing
mode. To enter Pairing mode, see page 64.
2 The violet indicator light turns on and the headset will search for a
Bluetooth phone within range, and attempt to pair with it.
Ensure the phone you wish to connect to is within range of the headset. •
Place the headset and phone close to each other to avoid pairing with
other devices.
The headset will attempt active paring for up to 20 seconds.•
The Bluetooth phone you want to connect with must not be paired with •
other devices. If the phone is already connected to another device,
end the connection and restart the Active pairing feature.
This feature may not be available on some devices.•
When the headset pair with your phone, a connection is made •
through the Hands-Free Prole. To make a connection through
another prole, such as Advanced Audio Distribution Prole (A2DP),
check the phone’s user manual on how to pair the Bluetooth device.
To Next Page
Loading...
