26
Connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to the Digital Output of the 1.
external digital component.
Press the 2. D.IN button on the remote control to select D.IN 1 or D.IN 2 input.
You can also use the • FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
M
To see video from your Cable Box/Satellite receiver, you must connect it's video output `
to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital `
components.
This system supports only DTS and Dolby digital audio, MPEG audio which is bitstream
`
cannot be supported.
Optical Cable
(not supplied)
To Next Page
Loading...
