75
ENG
● RADIO
LISTENING TO RADIO
Press the1. TUNER button to select the FM band.
Tune in to the desired station.2.
Automatic Tuning 1• : When the SKIP (
) button is
pressed, a preset broadcast station is selected.
Automatic Tuning 2•
: Press and hold the
TUNING/CH
(
)
button to
automatically search for active
broadcasting stations.
Manual Tuning• : Briefly press the TUNING/CH
(
)
button to increase or
decrease the frequency incrementally.
Main Unit
Press the1. FUNCTION button to select the FM band.
Select a broadcast station.2.
Automatic Tuning 1• : Press the STOP ( ) button to select PRESET and then press the
SKIP (
) button to select the preset station.
Automatic Tuning 2• : Press the STOP ( ) button to select MANUAL and then press and hold
the SKIP (
) button to automatically search the band.
Manual Tuning• : Press the
STOP ( )
button to select MANUAL
and then briefly press the
SKIP (
) button to tune in to a lower or higher frequency.
Mono/Stereo
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches •
between STEREO and MONO.
In a poor reception area, select • MONO for a clear,
interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
Press the 1. TUNER button to select the FM band.
Press the2.
TUNING/CH
(
)
button to select <89.10>.
Press the 3. TUNER MEMORY button.
PRGM• flashes in the display.
Press the 4.
SKIP ( )
button to select preset number.
You can select between 1 and 15 presets.•
Press the 5. TUNER MEMORY button again.
Press the • TUNER MEMORY button before PRGM disappears from the display.
PRGM• disappears from the display and the station is stored in memory.
To preset another station, repeat steps 2 to 5. 6.
To tune in to a preset station, press the • SKIP
( ) button
on the remote control to select a channel.
Radio
To Next Page
Loading...
