Samsung HT-BD1255 - System Upgrade; Firmware Upgrade

55
ENG
● SYSTEM UPGRADE
System upgrade
Samsung may offer upgrades to your Blu-ray Home Cinema's firmware in the future. To upgrade this firmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware. 1.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
Connect the network (see pages 28~29) and follow the steps below. 2.
FIRMWARE UPGRADE
With the unit in Stop mode/No Disc mode, press the 1.
MENU button.
Press the 2.
▲▼ buttons to select Setup, then press the
ENTER or + button.
Press the 3.
▲▼ buttons to select System Setup, then
press the ENTER or + button.
Press the 4.
▲▼ buttons to select System Update, then
press the ENTER or + button.
The player will check the cable or network connection 5.
status automatically. The connection checking window will
be displayed.
If the upgrade is possible : You will see information on the @
current and new versions of firmware in a message box.
If the upgrade is not possible : You will see the following @
description in the message box.
If the cable is not connected : •
“Ethernet cable is not connected. Please, check the
Ethernet cable”
If the network connection has failed : •
“This system can not connect to internet for update.
Please, check the network setup”
If no latest version is released (the latest version has •
been already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
If there is a disc in the player : •
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the
unit to perform the update.
If the server service is not available : •
“ Update Server is under maintenance. Please try again
later.”
DVD
System Setup
_
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
Power On/Off sound : On
BD Data Menagement
DivX(R) Registration
System Update
+
Music
Photo
Setup
System Update
This system can not connect
to internet for update.
Please, check the network setup.
OK
1 2 3 4
DVD
System Setup
_
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
Power On/Off sound : On
BD Data Menagement
DivX(R) Registration
System Update
+
Music
Photo
Setup
System Update
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
1 2 3 4
CancelStart
DVD
System Setup
_
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
Power On/Off sound : On
BD Data Menagement
DivX(R) Registration
System Update
+
Music
Photo
Setup
System Update
Now, Checking.
Please wait...
1 2 3 4
DVD
System Setup
_
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
Power On/Off sound : On
BD Data Menagement
DivX(R) Registration
System Update
+
Music
Photo
Setup
DVD
System Setup
_
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
_
Music
Photo
Setup