18
Please follow the steps below to install the speakers on the stands.
SPEAKER INSTALLATION (HT-BD2 ONLY)
How to Install the Speaker and the Stand
Turn the stand upside down and mount it on the stand base.
Insert and tighten (Black) screws on the bottom side of the stand base.
Place the stand on the floor. Insert and tighten 2 (Silver) screws
on the back of the stand.
1.
2.
3.
Speaker Packages
Please confirm that all the following contents are included in the package.
Front speakers and Surround speakers are
packaged separately as shown in the diagram.
STAND
BASE
STAND
connections
STAND BASE(4EA)
STAND (4EA)
SPEAKER (4EA)
Screw
(16EA): Black
Screw
(16EA): Silver
Front/Surround Speaker
Center Speaker
Subwoofer Speaker
Surround Back
Speaker (2EA)
Speaker Wire (7EA)
Audio Cable for Subwoofer
connection (1EA)
To Next Page
Loading...
