P.SCAN(PROGRESSIVE SCAN) FUNCTION
Unlike regular Interlace Scan, in which two elds of picture information alternate to create the entire picture
(odd scan lines, then even scan lines), Progressive Scan uses one eld of information (all lines displayed in
one pass) to create a clear and detailed picture without visible scan lines.
Press STOP button.
If playing a disc, press the STOP button twice so that “STOP”, appears on the
display.
P
ress and hold P.SCAN button on the remote control for over 5 seconds.
P
ressing and holding the button for over 5 seconds will select "P.SCAN" and
"I.SCAN" alternately.
When you select P.SCAN, "P.SCAN" will appear on the display.
To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than 5
seconds with no disc in the unit (“NO DISC" on the display), then load the DivX disc and play.
~
~
~
~
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you nd a location where reception is good, then fasten it to a
wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
✎
`
To Next Page
Loading...
