Delay Time
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
delay effect to the Center and Surround Speakers.
Settings
m
Move
"
Select
'
Return
<
Change
"
Select
'
Return
Delay Time
Front
Center : 00mSEC
Surround :
10mSEC
Subwoofer
Test Tone :
Off
Test Tone
Settings
m
Move
"
Select
'
Return
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone :
On ▶
"
Select
'
Return
Use the Test Tone feature to check the speaker
connections.
Press the
_+
buttons to select On.
The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Surround Right ➞ Surround
Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.
~
~
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video.
You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
KARAOKE SCORING
Karaoke score display can be toggled On or Off.
Off : Turns off the karaoke score display.
On : After the singing, the score is displayed on the
screen.
NOTE
This function is available only for the CD-DA/DVD.
Karaoke score may be affected by ambient noise.
You can select the language you prefer for on-
screen menu, disc menu, etc.
OSD
Language
Select the language for the on-screen
displays.
Disc Menu
Select the language for the disc menu
displays.
Audio
Select the language for disc audio.
Subtitle
Select the language for disc subtitles.
a To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your country
(see page 28).
a Y
ou cannot select OTHERS in the OSD Language
menu.
NOTE
The selected language will only appear if it is
supported on the disc.
~
~
~
~
✎
`
`
✎
`
To Next Page
Loading...
