Before Starting (Initial Settings)
Press the 1. POWER button when it is plugged in
TV for the first time.
Initial Settings screen will be displayed.
>
Move
"
Select
Initial settings > On-Screen Language
Select a language for the on-screen displays
English
한국어
Nederlands
Français
Deutsch
Italiano
Press the ▲▼ buttons to select the desired 2.
language, then press the ENTER button.
Press the 3. ENTER button to select Start button.
Press the ▲▼ buttons to select desired TV Aspect, 4.
then press the ENTER button.
If the HDMI cable is connected to the •
product, TV aspect does not appear.
NOTE ✎
If you have not selected a preferred language in `
the initial settings, you will see a language
selection window next time you turn on the
product.
Your language selection will apply to all menus: `
On-Screen Menu, Disc Menu, Audio, Subtitle.
If you want to move to the previous screen, press `
the RETURN button.
Once you select a menu language, you can `
change it by pressing the STOP (@) button on the
remote control for more than 5 seconds with no
disc inserted.
When the Initial Settings screen does not appear, `
refer to the Initial Settings. (see page 26)
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1
2
3
4
1
MENU BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
Function DVD/CD
Settings
Press the 1. POWER button.
Press the 2.
_+
buttons to select Settings, then
press the ENTER button.
Press the 3.
▲▼
buttons to select the desired
menu, then press the ENTER button.
Press the 4.
▲▼
buttons to select the desired
sub-menu, then press the ENTER button.
Press the 5.
▲▼
buttons to select the desired
item, then press the ENTER button.
Press the 6. EXIT button to exit the setup menu.
To Next Page
Loading...
