Listening to Radio
Using buttons on the Remote Control
Press the 1. FUNCTION button to select FM.
Tune in to the desired station.2.
Preset Tuning 1• : You must first add a desired
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING/CH ( ) button to select the preset
station.
Manual Tuning• : Press the STOP (@) button to
select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher
frequency.
Automatic Tuning• : Press the STOP (@) button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the •
sound switches between STEREO and
MONO.
In a poor reception area, select • MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the 1. FUNCTION button to select FM.
Press the 2.
TUNING/CH ( ) button
to select
<89.10>.
Press the 3. TUNER MEMORY button.
Number flashes on the display.•
Press the 4.
TUNING/CH ( )
buttons
to select preset number.
You can select between 1 and 15 presets.•
Press the 5. TUNER MEMORY button again.
Press the • TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the •
station is stored in memory.
To preset another station, repeat steps 2 to 5. 6.
To Next Page
Loading...
