NOTE ✎
The default setting of this function is HDMI Audio Off. `
HDMI Audio is automatically down-mixed to 2ch for `
TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ `
/P.BASS doesn't work.
With HDMI AUDIO set to 'On', the volume can be `
adjusted only using the TV remote control.
User EQ
You can configure the equalizer settings manually to
your preference.
Settings
m
Move
"
Select
'
Return
a
Reset
>
Adjust
<
Move
'
Return
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz
NOTE ✎
This can be also done using the DSP/EQ button. `
(see page 34)
Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
Off• : Turn the Audio Return Channel function off.
Auto• : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
NOTE
✎
When Anynet+ (HDMI-CEC) is Off, the Audio `
Return Channel function is not available.
Using an ARC (Audio Return Channel)-
`
uncertified HDMI cable may cause a problem in
compatibility.
ARC function is only available if an ARC-
`
compliant TV is connected.
System
Initial Settings
By using the Initial Settings, you can set the language
and TV aspect.
NOTE ✎
If the HDMI cable is connected to the product, `
TV aspect does not appear and it is set to 16:9
Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
NOTE
✎
This option is not activated if you select OK.To `
activate this option, please activate the DivX(R)
Deactivation.
Even after you reset the system, the settings of `
DivX Registration will not be reset.
DivX(R) Deactivation
Select this to get a new registration code.
To Next Page
Loading...
