HT-D5530K
(L) (R)
CENTER
SUBWOOFER
SPEAKER CABLE
Speaker Components
SURROUND
(L) (R)
FRONT
Speaker Components
FRONT
(L) (R)
STAND
STAND BASE
SPEAKER CABLE
SURROUND
(L) (R)
CENTER
SUBWOOFER
SCREW (Large): 2EA
SCREW (Small): 8EA
HT-D5500K
FRONT
(L) (R)
STAND
STAND BASE
SPEAKER CABLE
SURROUND
HT-D5550K
CENTER
SUBWOOFER
SCREW (Large): 4EA
SCREW (Small): 16EA
(L) (R)
Installing the Speakers on the Tallboy Stand
* HT-D5530K only - Front Speakers
* HT-D5550K only - Front/Surround Speakers
Turn the Stand Base upside-down and connect it to the Stand.
Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes
marked using a screwdriver as shown in the illustration.
CAUTION
When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle
or can be damaged. (torque screwdriver- below 15 kg.f.cm)
1.
2.
!
To Next Page
Loading...
