Samsung HT-D5530 - Listening to Radio

56 English
Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
) button to select the preset
station.
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH (
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO
for a clear, interference-free broadcast.
1.
2.
•
•
•
•
•
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the FUNCTION button to select FM.
Press the
TUNING/CH
(
) button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the TUNER MEMORY button
again.
Press the TUNER MEMORY button
before
NUMBER disappears from the
display.
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 4.
To tune in to a preset station, press the
TUNING/CH ( ) button to select a
channel.
1.
2.
3.
•
4.
•
•
5.
•
C
TUNER
MEMORY
HT-D5530_XY_0221.indd 56HT-D5530_XY_0221.indd 56 2011-02-28  9:18:422011-02-28  9:18:42