To Next PageTo Next PageWhat to do if Dolby Digital 5.1 surround sound is not working on Samsung HT-DM150?
First, check if the disc being played has the “Dolby Digital 5.1CH” mark, as 5.1-channel sound is only reproduced if the disc is recorded with 5.1 channel sound. Also, verify that the DVD player is connected to the correct speakers.
How to reset a malfunctioning Samsung Home Theater System?
If your Samsung Home Theater System is malfunctioning (not working or no sound), while the player is in stop mode, hold the Stop button down on the main unit for over 5 seconds. "INITIAL" will appear on the display, resetting all settings to the factory preset condition. Note: This erases all settings and should only be used when necessary.
How do I reset my malfunctioning Samsung HT-DM150 Home Theater System?
While the player is in stop mode, hold the Stop button down on the main unit for over 5 seconds. "INITIAL" will appear on the display, and all settings will return to the Factory Preset condition. Note that the RESET function erases all settings, so use it only when necessary.
How to fix no sound on Samsung HT-DM150 Home Theater System?
If your Samsung Home Theater System isn't producing sound, remember that no sound is output during high-speed, slow, or step motion playback. Check if the speakers are properly connected and the speaker setup is correctly customized. Also, inspect the disc for severe damage or dirt and clean it if necessary.
Why does my Samsung Home Theater System disc spin but no picture appears?
If your Samsung Home Theater System disc is spinning but there's no picture, first, ensure your TV is powered on and the video cables are correctly connected. Check if the player is in PAUSE mode. Verify that your TV's video format (NTSC/PAL) is correctly set by pressing the NTSC/PAL button. Inspect the disc for dirt or damage. Note that some discs might not play due to manufacturing issues, and slight vertical flickering during scene changes is normal.
What to do if Samsung HT-DM150 Home Theater System disc does not play?
If a disc isn't playing on your Samsung Home Theater System, verify the DVD's region code. Discs purchased abroad might be incompatible. Note that the player doesn't support CD-ROMs or DVD-ROMs. Also, check the DVD's rating level to ensure it's appropriate.
How to fix Samsung HT-DM150 when desired radio station cannot be tuned in?
If you're unable to tune into a desired radio station on your Samsung Home Theater System, ensure the antenna is properly installed. If the antenna signal is weak, consider installing an external FM antenna in an area with good reception.
Why is sound only coming from some speakers on my Samsung Home Theater System?
When listening to a CD or radio, sound is often output only to the front speakers. To use all six speakers, select the “PRO LOGIC” option by pressing the Pro Logic button on the remote. Also, verify that your DVD disc is 5.1 CH compatible.
Why is there no sound coming from my Samsung Home Theater System?
Several factors could cause a lack of sound. Note that no sound is produced during high-speed, slow, or step motion playback. Check if the speakers are properly connected and the speaker setup is correctly customized. Also, inspect the disc for severe damage or dirt, and clean it if needed.
Why is the sound quality irregular on my Samsung HT-DM150?
Check the speaker cables to ensure they are not loose. Also, inspect the speaker connectors for any dirt or debris.
General| Brand | Samsung |
|---|---|
| Model | HT-DM150 |
| Category | Home Theater System |
| Language | English |
