To Next PageTo Next PageWhy are audio language and subtitles not working on my Samsung HT-F4500?
If audio language and subtitles are not working on your Samsung Home Theater System, it is because the disc does not contain them.
Why does the remote control not work with my Samsung HT-F4500?
If the remote control for your Samsung Home Theater System isn't working, make sure you're within its operational range and pointing it at the sensor at the correct angle. Also, check to see if the batteries are dead and need replacing.
Why is there no sound coming from my Samsung HT-F4500 Home Theater System?
If your Samsung Home Theater System isn't producing sound, especially during fast playback, slow playback, or step motion playback, this is normal. Also, verify that the speakers are properly connected and the speaker setup is correctly customized. Finally, check the disc for severe damage.
Why is Dolby Digital 5.1 CH Surround Sound not working on my Samsung HT-F4500 Home Theater System?
If your Samsung Home Theater System isn't producing Dolby Digital 5.1 CH Surround Sound, first check if the disc has the "Dolby Digital 5.1 CH" mark, as surround sound is only produced if the disc is recorded with 5.1 channel sound. Also, verify that the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
Why can't I connect to the BD-LIVE server on my Samsung HT-F4500 Home Theater System?
If you're unable to connect to the BD-LIVE server on your Samsung Home Theater System, first test your network connection using the Network Status function. Ensure a USB memory device is connected with at least 1GB of free space for the BD-LIVE service, which you can check in BD Data Management. Also, verify that the BD-LIVE Internet Connection option is set to Allow(All). If problems persist, contact the content provider or update to the latest firmware.
How to reset the rating level password on my Samsung HT-F4500?
If you've forgotten the rating level password for your Samsung Home Theater System, remove any disc from the product, then press and hold the product's 5 button for longer than 5 seconds. INIT will appear on the display, and all settings will return to the default values. Then, press the POWER button. Note that resetting will erase all stored settings, so use this function only when necessary.
Why is my Samsung HT-F4500 Home Theater System showing an abnormal HDMI output screen?
If your Samsung Home Theater System is experiencing an abnormal HDMI output screen with random noise, it indicates that your TV does not support HDCP (High-bandwidth Digital Content Protection).
What to do if there is no picture on my TV due to HDMI output settings on my Samsung HT-F4500 Home Theater System?
If the HDMI output is set to a resolution your TV doesn't support, such as 1080p, you might not see a picture. To fix this, press and hold the 5 button on the front panel for more than 5 seconds without a disc inserted. This will revert all settings to the factory defaults.
Why can I only hear sound from a few speakers on my Samsung HT-F4500?
If sound is only coming from a few speakers on your Samsung Home Theater System, it could be because, on certain Blu-ray/DVD discs, sound is output from the front speakers only. Check that the speakers are connected properly. Also, make sure to adjust the volume. When playing audio from a CD, the radio, or a TV, the unit outputs sound to the front speakers only.
What to do if Samsung HT-F4500 playback does not start immediately?
If playback on your Samsung Home Theater System doesn't start immediately when you press the Play/Pause button, it might be because you are using a deformed disc or a disc with scratches on the surface. Try wiping the disc clean.
General| Disc loading type | Tray |
|---|---|
| Disc types supported | BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Number of optical discs | 1 discs |
| Optical disc player type | Blu-Ray player |
| Built-in HDD | No |
| Apple docking compatibility | - |
| 3D | Yes |
| Video formats supported | AVCHD, MKV, WMV, XVID |
| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS 96/24, DTS-HD |
| RMS rated power | 500 W |
| Audio output channels | 5.1 channels |
| Audio formats supported | AAC, FLAC, LPCM, WMA |
| Supported radio bands | FM |
| Subwoofer type | Passive subwoofer |
| Product color | Black |
| Consumer Electronics Control (CEC) | Anynet+ |
| USB version | 2.0 |
| SCART ports quantity | 0 |
| Number of HDMI outputs | 1 |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 59 W |
Weight and Dimensions| Main unit weight | 2500 g |
|---|---|
| Subwoofer weight | 6060 g |
| Center speaker weight | 470 g |
| Satellite speaker weight | 320 g |
| Main unit dimensions (WxDxH) | 430 x 55 x 250 mm |
| Subwoofer dimensions (WxDxH) | 200 x 390 x 350 mm |
| Front speaker dimensions (WxDxH) | 90 x 139 x 70 mm |
| Center speaker dimensions (WxDxH) | 228 x 77 x 70 mm |
| Satellite speaker dimensions (WxDxH) | 77 x 107 x 68 mm |
