To Next PageTo Next PageHow to reset a Samsung HT-F5500W Home Theater System that is not working?
If your Samsung Home Theater System is not working correctly, such as the power going out or a strange noise occurring, try resetting the unit. In STANDBY mode, press and hold the remote control's 5 button for 5 seconds. Keep in mind that using the RESET function will erase all stored settings, so only use this if necessary.
How to fix a Samsung HT-F5500W Home Theater System remote that is not working?
If your Samsung Home Theater System remote control isn't working, try these steps: Ensure you are within the operational range and at the correct angle relative to the sensor. Check if the batteries are drained and replace them if needed. Also, make sure you've selected the correct mode (TV/BD) function on the remote.
Why is there no sound coming from my Samsung Home Theater System?
If your Samsung Home Theater System is not producing sound, consider the following: During fast playback, slow playback, and step motion playback, the home theater system will not produce sound. Ensure the speakers are properly connected and the speaker setup is correctly customized. Check if the disc is severely damaged.
Why is Dolby Digital 5.1 CH Surround Sound not working on my Samsung HT-F5500W?
If your Samsung Home Theater System is not producing Dolby Digital 5.1 CH Surround Sound, first check if the disc has the 'Dolby Digital 5.1 CH' mark, as surround sound is only produced if the disc is recorded with 5.1 channel sound. Also, ensure the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
Why is sound only coming from some speakers on my Samsung HT-F5500W Home Theater System?
If you can only hear sound from a few speakers on your Samsung Home Theater System, check if the speakers are connected properly. Also, adjust the volume. Note that when playing audio from a CD, the radio, or a TV, the unit outputs sound to the front speakers only.
What to do if the disc won't eject from my Samsung HT-F5500W Home Theater System?
If the disc in your Samsung Home Theater System won't eject, ensure the power cord is securely plugged into the outlet. If it is, try turning the power off and then back on.
Why is there no picture or poor picture quality on my Samsung HT-F5500W?
If your Samsung Home Theater System disc is rotating but no picture is produced, or the picture quality is poor, check the following: Ensure the TV is powered on. Verify that the video cables are connected properly. Inspect the disc for dirt or damage. Keep in mind that a poorly manufactured disc may not be playable.
What to do if my Samsung Home Theater System doesn't play immediately?
If playback does not start immediately when you press the Play/Pause button on your Samsung Home Theater System, it could be due to a deformed or scratched disc. Try wiping the disc clean.
How to reset the rating level password on a Samsung Home Theater System?
If you've forgotten the rating level password on your Samsung Home Theater System, remove any disc from the product, then press and hold the product's 5 button for longer than 5 seconds. INIT will appear on the display, and all settings will return to the default values. Finally, press the POWER button. Note that this will erase all stored settings.
Why can't my Samsung HT-F5500W Home Theater System receive radio broadcasts?
If your Samsung Home Theater System is not receiving radio broadcasts, check if the antenna is connected properly. If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
General| Brand | Samsung |
|---|---|
| Model | HT-F5500W |
| Category | Home Theater System |
| Language | English |
Covers general safety warnings like electric shock, fire risk, and handling with moisture.
Details FCC compliance for digital devices and Canadian interference regulations.
Classification and warnings related to Class 1 laser product hazards and exposure.
Numbered safety instructions for operating the product safely and correctly.
Instructions for handling, cleaning, and storing discs to maintain playback quality.
Precautions for preventing damage, ensuring proper operation, and avoiding hazards.
Actions to take in case of abnormal noise, burning smell, or smoke from the product.
Information on licenses for Dolby, DTS, HDMI, Java, and other technologies.
Guidelines for safe and comfortable 3D viewing, including potential discomforts.
Connecting 3D-compliant devices and requirements for 3D playback.
Adjusting settings like resolution, BD Wise, and optimal viewing distance for 3D.
Lists compatible disc types (Blu-ray, DVD, CD) and content formats (VIDEO, MUSIC, PHOTO).
Identifies disc types and formats that the product cannot play.
Explains the importance of matching disc and product region codes for playback.
Displays logos indicating disc compatibility (Blu-ray, DVD, Dolby, DTS, Java).
Details supported file extensions, codecs, resolution, frame rates, and bitrates.
Lists playback limitations and specifications for video and audio decoders.
Details supported music file formats, codecs, and ranges.
Details supported picture file formats, types, and resolutions.
Notes and recommendations for connecting USB storage devices.
Overview of buttons, display, and ports on the front panel.
Diagram and description of rear panel connections and ports.
Instructions for connecting the FM antenna for optimal reception.
Identifies buttons and their general functions on the remote control.
Details on how to use various remote buttons for playback and settings.
Instructions for installing batteries and notes on their lifespan and remote range.
Procedure for programming the remote to control various TV brands.
Recommendations for positioning front, center, surround, and subwoofer speakers.
Guidelines for selecting the ideal listening position relative to the TV screen.
Step-by-step instructions for connecting speaker wires to the unit and speakers.
Instructions for connecting the wireless receiver module for surround speakers.
Safety guidelines for speaker installation, including wall mounting and polarity.
Instructions for attaching a ferrite core to the power cord to prevent RF interference.
Connecting the product to a TV and external devices using HDMI cables.
Connecting analog (AUX) and digital optical audio components.
Steps for connecting the product to a network using a wired LAN connection.
Steps for connecting the product to a network using a wireless connection.
Guide to initial settings, language, network, and navigating the Home screen.
Instructions on how to access the main settings screen from the Home screen.
Explains the function of HOME, RETURN, ENTER/DIRECTION, and EXIT buttons.
Configuration options for TV aspect ratio, resolution, frame rate, and color settings.
Settings for BD Wise connectivity and Smart Hub screen size optimization.
Guides for speaker setup, calibration using test tones, and speaker selection.
Settings for progressive mode, equalizer, smart volume, ARC, digital output, and downmixing.
Configuring network status, settings, and using Wi-Fi Direct for device connection.
Managing AllShare settings, device names, and BD-Live functions.
Configuring app notifications, VOD rating locks, and general app properties.
Resetting Smart Hub, reviewing terms, and setting system language.
Setting up and using wireless USB keyboards and mice.
Managing security PINs, BD/DVD parental ratings, and password reset.
Adjusting front panel brightness, time zone, and menu transparency.
Operating Anynet+, remote management, software updates, and contact information.
Automatic configuration steps for establishing a wired network connection.
Manual configuration for IP address, subnet mask, gateway, and DNS server.
Connecting wirelessly via Automatic, Manual, or WPS/PBC methods.
Detailed steps for manually setting SSID, security type, and IP address.
Simplified wireless connection using the WPS/PBC button on the router.
Connecting devices directly via Wi-Fi Direct using PBC, PIN, or device-to-device.
Procedure for upgrading product software for performance improvements.
Instructions for updating software using a network connection ('Update Now').
Configuration for automatic software downloads and installation.
Detailed steps for downloading and installing software updates using a USB drive.
How to access and browse media content from various sources.
Standard procedure for inserting and playing commercial Blu-ray, DVD, or CD discs.
Methods for playing multimedia files from connected USB devices.
How to control playback of videos, music, and photos from a USB device.
How to play multimedia files recorded on Blu-ray, DVD, or CD discs.
Downloading and installing AllShare software for PC and connecting devices.
Identifies remote buttons used for controlling video playback.
Controls for play, pause, fast motion, slow motion, and step motion playback.
How to control PC media playback from a smart phone.
Features for skipping tracks, and setting repeat modes (Off, Title, Chapter, A-B).
Accessing functions like Play from Beginning, 3D adjustments, and video tools.
Options to search for scenes, titles, chapters, or specific time points in videos.
Adjusting repeat modes, picture modes (Dynamic, Standard, Movie, User).
Selecting audio language and customizing sound preferences with the equalizer.
Using View options (Date, Title, Folder) to browse video files.
Accessing Options menu (Play Selected, Send) and music playback controls.
Using remote buttons and screen controls for music playback.
Browsing music files by Track, Album, Artist, Genre, Folder and using file options.
Setting repeat modes and shuffling tracks for audio CDs.
Steps to create custom playlists by selecting tracks from audio CDs.
Process for ripping audio tracks from CDs to a USB device in MP3 format.
Explanation of Bluetooth technology and its capabilities for wireless audio.
Detailed steps for connecting the home theater system to Bluetooth devices.
Instructions on how to disconnect the home theater from a paired Bluetooth device.
Using the Tools menu for photo slideshows, zoom, rotate, and background music.
Using View and Options menus to browse and manage photo files.
Instructions for tuning radio stations, setting mono/stereo, and presetting stations.
Selecting and configuring sound effects like DSP, Dolby Pro Logic II, and SFE modes.
Detailed explanations of SFE Mode settings and 3D Sound functionality.
Using the TV SOUND button to direct TV audio through home theater or TV speakers.
Steps for logging into your Samsung account and managing account information.
Procedure for setting up Smart Hub to access apps and online services.
How to download, stream, browse, and select movies and TV shows.
How to download, access, and manage applications from the Apps store.
Process for accessing Samsung Apps, downloading, and purchasing apps.
Using the All Downloaded screen to sort, organize, and manage apps.
Securing applications by locking or unlocking them using a PIN.
Adding, deleting, and moving apps within the My Apps section.
Creating and managing folders to organize applications on the screen.
Moving selected applications into existing or new folders.
Permanently removing apps and folders from the device.
Automatically searching for and installing updates for downloaded applications.
Displaying your smartphone or smart device screen on the TV.
Switching between Pointer Browsing and Link Browsing for web navigation.
Explanation of the icons in the web browser's control panel.
How to use the on-screen keyboard pop-up for text entry and navigation.
Customizing keyboard language, text prediction, and next letter prediction.
Controlling browser behavior, security, and privacy settings.
Setting homepage, blocking pop-ups, managing page content, and encoding.
Connecting the product to internet services like Pandora for automatic login.
Requirements and steps for accessing BD-LIVE content.
Notes on HDMI output, 3D settings, aspect ratio, BD Wise, and digital output.
Notes regarding BD-Live, Anynet+ (HDMI-CEC), BD Data Management, and front display.
Notes on speaker settings, HDMI audio, ARC, video file playback, and tools menu.
Notes on audio language, subtitles, JPEG files, Dolby Pro Logic II, and photo tools.
Detailed table for configuring digital output settings when connected to an HDMI AV receiver.
Settings for audio stream output from DVD and Blu-ray discs.
Troubleshooting steps for disc ejection, playback errors, and sound output problems.
Specific guidance for issues related to Dolby Digital 5.1 CH surround sound.
Resolving issues with remote control, video output, menus, and aspect ratio.
Addressing problems with product operation, power, noise, and forgotten passwords.
Troubleshooting radio reception, TV audio, 'Not Available' messages, and HDMI resolution.
Troubleshooting HDMI output, AllShare connection, and BD-LIVE service errors.
Guidance on contacting customer support for product repair services.
Technical specifications for power, weight, dimensions, FM tuner, and HDMI.
Specifications for the amplifier, speaker system, and SWA-6000 subsystem.
Details on the warranty duration, purchase date validation, and service procedures.
Lists conditions not covered by warranty and legal disclaimers.
