To Next PageTo Next PageWhat to do if my Samsung HT-F4550 Home Theater System HDMI output is not supported?
If you don't see a picture on your TV because the HDMI output is set to an unsupported resolution, press and hold the 5 button on the front panel of your Samsung Home Theater System for more than 5 seconds with no disc inserted. This will revert all settings to the factory defaults.
Why does playback not start immediately on my Samsung HT-F4550 Home Theater System?
If playback doesn't start immediately when you press the Play/Pause button on your Samsung Home Theater System, it might be due to a deformed disc or a disc with scratches. Try wiping the disc clean.
Why can't I connect to the BD-LIVE server on my Samsung HT-F4550?
If you're having trouble connecting to the BD-LIVE server with your Samsung Home Theater System: * Test the network connection using the Network Status function. * Ensure a USB memory device is connected. * The memory device must have at least 1GB of free space. * Check if the BD-LIVE Internet Connection option is set to Allow(All).
Why is sound only coming from a few speakers on my Samsung Home Theater System?
If sound is only coming from a few speakers on your Samsung Home Theater System, verify that the speakers are connected properly and adjust the volume. On certain Blu-ray/DVD discs, sound is output from the front speakers only. Also, when playing audio from a CD, the radio, or a TV, the unit outputs sound to the front speakers only.
Why can't my Samsung HT-F4550 Home Theater System receive radio broadcasts?
If your Samsung Home Theater System isn't receiving radio broadcasts, check if the antenna is connected properly. If the antenna's input signal is weak, consider installing an external FM antenna in an area with good reception.
What to do if playback does not start on Samsung Home Theater System?
If playback doesn't start on your Samsung Home Theater System, be sure that the rating level is correct. A Blu-ray/DVD disc purchased from abroad may not be playable, so check the region number of the disc. Also, CD-ROMs and DVD-ROMs cannot be played on this product.
How to reset my Samsung HT-F4550?
To reset your Samsung Home Theater System, press and hold the remote control's 5 button for 5 seconds in NO DISC mode. Note: This will erase all stored settings, so only use this if necessary.
What to do if my Samsung Home Theater System has no picture, or the picture quality is poor?
If your Samsung Home Theater System is playing a disc but there's no picture, or the picture quality is poor, ensure that the TV is powered on and the video cables are properly connected. Also, verify that the disc isn't dirty or damaged. In some cases, a poorly manufactured disc may not be playable.
How to reset rating level password on Samsung HT-F4550 Home Theater System?
With no disc in the product, press and hold the product's 5 button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. Then, press the POWER button. Please note that using the RESET function will erase all stored settings, so only use this if necessary.
Why is Dolby Digital 5.1 CH Surround Sound not produced on my Samsung Home Theater System?
Check if there is a 'Dolby Digital 5.1 CH' mark on the disc. Verify if the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
General| Brand | Samsung |
|---|---|
| Model | HT-F4550 |
| Category | Home Theater System |
| Language | English |
