What to do if my Samsung HT-TXQ120 disc is rotating but no picture is produced?
If the disc is rotating but no picture appears, check if the TV is powered on and ensure the video cables are properly connected. Also, inspect the disc for dirt or damage. Keep in mind that a poorly manufactured disc may not be playable.
Why can't I receive radio broadcast on my Samsung HT-TXQ120?
If you're unable to receive radio broadcasts, ensure the antenna is connected properly. If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
General| Audio decoders | Dolby Digital, Dolby Pro Logic II, DTS |
|---|---|
| RMS rated power | 1000 W |
| Audio output channels | 5.1 channels |
| Audio formats supported | MP3, WMA |
| Center speaker RMS power | 150 W |
| Subwoofer type | Active subwoofer |
| Video formats supported | DivX |
| USB version | 2.0 |
| SCART ports quantity | 1 |
| Supported radio bands | FM |
| Radio Data System (RDS) | No |
| Number of optical discs | 1 discs |
| Optical disc player type | DVD player |
Details total power, DSP, playback formats, video, I/O ports, and speaker type.
Illustrates and labels front/back panels of the main set with numbered components.
Illustrates and labels front/back panels of the subwoofer with numbered components.
Provides step-by-step instructions and diagrams for disassembling the main set.
Provides step-by-step instructions and diagrams for disassembling the sub woofer.
Highlights product's 1080P support, upscaling, and HDMI capabilities.
Explains HDMI output for digital picture and input for digital connection.
Presents the block diagram for the wireless ready functionality.
Details methods for checking the wireless ready module and port status.
Details main PCB block diagrams, key components, and connector functions.
Illustrates Jack PCB block, components, and details connector functions.
Covers amplifier block diagrams, PCB layout, modulator, power stage, and SMPS protection.
Explains HDMI block diagrams and signal flow for input and output.
Covers deck assembly and detailed steps for disassembling the mecha deck.
Guides on MICOM reset, update, version check, and DVD flash initialize.
Provides a flowchart for diagnosing issues with the main unit.
Details troubleshooting for audio output, HDMI issues, and signal checks.
Explains conditions and points for troubleshooting protection activation.
Lists common issues and checks for the main set and sub woofer.
Addresses symptoms, causes, and checks for MICOM communication failures.
Provides steps to diagnose and resolve fan errors in the sub woofer.
Provides links to PDF documents for block and schematic diagrams of the system.
To Next Page
