Analogue signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analogue component.
Be sure to match connector colours.
Press the button on the remote control to select input.
You can also use the button on the main unit.
The mode switches as follows :
.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital
component.
Press the button on the remote control to select .
You can also use the button on the main unit.
The mode switches as follows :
.
~
~
M
`
~
Audio Cable (not supplied)
If the external analogue component
has only one Audio Out, connect
either left or right.
Optical Cable
(not supplied)
External Analogue Component
External Digital Component
To Next Page
Loading...
