●
You can set the time that the Home Cinema will shut itself off.
Press the button.
will be displayed. Each time the button is pressed, the preset
time changes as follows :
10 20 30 60 90 120 150 OFF
To con rm the sleep timer setting, press the button.
The remaining time before the Home Cinema will shut itself off is
displayed.
Pressing the button again changes the sleep time from what you have
set earlier.
To cancel the sleep timer, press the button until appears on the display.
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press the button.
Each time the button is pressed, the brightness of front display will be
adjusted.
This is useful when answering a doorbell or telephone call.
Press the button.
appears in the display.
To restore the sound, press the button again.
P.BASS function stresses low tones providing thudding sound effects.
Press the button to select P.BASS mode.
You can select the level of low tones you desire.
The P.BASS function is only available with 2 channel LPCM
sources such as mp3,Divx,cd and wma.
Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
The P.BASS does not work with DSP/EQ or DOLBY PRO LOGIC ll modes.
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.
~
~
~
~
~
~
M
`
`
Convenient function
To Next Page
Loading...
