Radio
Press the button to select the FM band.
Tune in to the desired station.
:
Press the button
to select and then press the
,
,
.
button to select
the preset station.
: Press the
button to select and then press and hold
the ,
,
. button to automatically search the band.
:
Press the
button.
Briefl y press the ,
,
. button to increase or
decrease the frequency incrementally.
Press the button to select the FM band.
Select a broadcast station
.
:
Press the (@) button to select
and then press the [,] button to select the
preset station.
: Press the
(@)
button
to select and then press and hold the
[,]
button to automatically search the band.
: Press the
(@)
button to
select and then briefl y press the button to tune in to a lower or higher frequency.
Press the button to listen in Mono/Stereo. (This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between and .
In a poor reception area, select MONO for a clear, interference-free broadcast.
Example : Presetting FM 89.10 in the memory
Press the button to select the FM band.
Press the
button.
Press the
,
,
.
button to select .
Press the button.
fl ashes in the display.
Press the
,
,
.
button to select preset number.
You can select between 1 and 15 presets.
Press the button again.
Press the button before
disappears from the display.
disappears from the display and the station is
stored in memory.
To preset another station, repeat steps 3 to 6.
Press the button.
Press the
,
,
.
button on the remote control to select a channel.
This unit does not receive AM(MW) broadcasts.
~
~
~
~
~
~
~
~
~
~
~
~
M
`
To Next Page
Loading...
