Before using your home cinema
The DVD Home Cinema's remote can be used to control Samsung TV’s.
.
Plug the main unit's power cord into the AC power supply.
Press the button to switch to DVD RECEIVER mode to operate the DVD Home
Cinema.
Press the button on the main unit or button
on the remote to enable DVD/CD playback.
Press the button to set the remote to TV mode.
Press the button to turn on your Samsung TV
with this remote.
Press the button to select VIDEO mode
on your TV.
By default, the video format is set to "PAL".
"NTSC" or "PAL" will appear in the display. At this time, press the
Number 7 button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as
the video format of your TV.
~
~
~
~
VIDEO
To Next Page
Loading...
