Choose one of the three methods for connecting to a TV.
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the Home Cinema
System to the HDMI IN jack on your TV.
If your television has Component Video inputs, connect a Component video cable (not supplied) from
the Component Video Output (PR, PB and Y) jacks on the back of the Home Cinema System to the
Component Video Input jacks on your TV.
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Home Cinema System
to the VIDEO IN jack on your TV.
The resolution from the Component Output is 576i(480i).
If you use an HDMI cable to connect a Samsung TV to the Home Cinema System, you can operate the Home Cinema using
the TV's remote control. This is only available with SAMSUNG TV's that support Anynet+(HDMI-CEC).
Please check the
logo (If your TV has an
logo, then it supports the Anynet+ function.)
M
`
`
`
METHOD3
(supplied)
METHOD2
METHOD1
To Next Page
Loading...
