This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
In Stop mode, press the button.
Press the Cursor
%
button to move to and then press the
or + button.
Press the Cursor
%
button to move to and then press the
or + button.
Press the Cursor
,
to adjust the .
When the Cursor
button is pressed, the effect is greater, and
when the Cursor
button is pressed, the effect is smaller.
d Press the button to return to the previous level.
d Press the button to exit the setup screen.
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.
In Stop mode, press the button.
Press the Cursor
%
button to move to and then press the
or + button.
Press the Cursor
%
button to move to and then press the
or + button.
Press the Cursor
,
button to select the AV-SYNC Delay Time
and then press the button.
You can set the audio delay time between 0 ms and 300 ms.
Set it to the optimal status.
d Press the button to return to the previous level.
d Press the button to exit the setup screen.
~
~
To Next Page
Loading...
