●
System setup
For your convenience, you can set this Home Cinema's features for the best use in your home environment.
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the button.
Press the Cursor
%
button to move to and then press the
or + button.
Select and then press the or + button.
Press the Cursor
$
,
%
button to select and then
press the or + button.
Press the Cursor
$
,
%
button to select the desired language
and then press the button.
Once the setup is complete, the OSD will be English if
English has been selected as the language.
d Press the button to return to the previous level.
d Press the button to exit the setup screen.
: Selecting the OSD Language
: Selecting the Audio Language (recorded on the disc)
: Selecting the Subtitle Language (recorded on the disc)
: Selecting the Disc Menu Language (recorded on the disc)
a
If the language you selected is not recorded on the disc, menu
language will not change even if you set it to your desired language.
: To select another language, select OTHERS and
enter the language code of your country
(see page 56)
.
AUDIO, SUBTITLE and DISC MENU language can be
selected
.
Selects the type of output from the HDMI/OUT jack.
: Normally, select this when connecting to an HDMI device.
: Gives brighter colours and deeper blacks. Select this if colours
are weak.
In Stop mode, press the button.
Press the Cursor
%
button to move to and then press the
button.
Press the Cursor
%
button to move to and then
press the button.
Press the Cursor
$
,
%
button to select the desired item and then press the button.
Once the setup is complete, you will be taken to the previous screen.
d Press the button to return to the previous level.
d Press the button to exit the setup screen.
~
~
~
~
~
~
~
~
~
To Next Page
Loading...
